Doming resin is used to create a raised, clear and glossy coating on stickers, labels, badges, keychains, nameplates and decorative craft items.

Doming resin is a specialised type of epoxy resin used by artists, crafters and product makers when they want to add a smooth, rounded, three-dimensional finish over a flat design. Instead of forming a thin, flat coating, it stays slightly raised at the edges and creates a dome-like surface. This gives printed logos, artwork, names, photographs and decorative elements a more polished and premium appearance.

Artists commonly apply doming resin over printed stickers, vinyl labels, personalised badges, refrigerator magnets, keychains, jewellery components, nameplates, decals and small branding products. The transparent resin enhances the colours underneath, adds depth to the design and produces a high-gloss finish that helps the artwork look brighter and more professional. It also creates a protective upper layer that can help shield the printed surface from regular handling, moisture, scratches and everyday wear.

Doming resin is especially useful for personalised craft businesses. For example, an artist can print a customer’s name, company logo, illustration or photograph on a suitable base and then apply resin over it to convert the ordinary printed piece into a finished decorative product. A higher-viscosity, self-levelling doming resin is generally preferred because it remains within the boundaries of the design while forming a smooth raised surface. MBEPOXY® Flexible Doming Resin is formulated for a clear, glossy dome finish and is intended for applications such as labels, decals and wearable art.

For the best result, the base should be clean, dry, level and properly sealed where necessary. Artists should also measure the components accurately, mix slowly and apply a controlled quantity, as excessive resin may flow beyond the edges. A small compatibility test is recommended before coating printed paper, ink, adhesive stickers or unfamiliar materials.

Both doming resins are available in flexible and rigid or hard-cure, formulations. 

The finish you receive after curing depends on the specific type of doming resin selected. Flexible doming resin remains slightly bendable after it has fully cured, while rigid doming resin cures into a firm and hard raised coating. Therefore, artists should choose the formulation according to the base material and the way the finished product will be handled.

Flexible doming resin is generally suitable for stickers, vinyl labels, decals, wearable art and other surfaces that may bend or flex during use. Because the cured dome can move slightly with the underlying material, it helps reduce the possibility of cracking, separating or peeling when the product is curved. MBEPOXY® Flexible Doming Resin is specifically formulated to maintain flexibility after curing while creating a clear, glossy and raised finish.

Rigid or hard-cure doming resin is better suited to products that should remain firm, such as badges, keychains, nameplates, flat tags, magnets, jewellery pieces and decorative craft components. Once cured, it creates a solid dome that gives printed artwork, photographs, names or logos a polished, glass-like appearance. MBEPOXY offers both hard fast-cure and hard slow-cure doming resin options, allowing artists to select a system according to their preferred working and production requirements.

It is important to understand that one formulation does not become flexible or rigid based only on the amount poured. The final behaviour is determined mainly by the resin and hardener formulation. Before starting a large batch, artists should check the product description and test a small sample on the actual sticker, label or craft base. For bendable surfaces, choose flexible doming resin. For products that need a firm and stable dome, choose a hard-cure resin.

Yes, doming resin is specially designed for stickers, labels and decals.

Doming resin is an excellent choice for converting ordinary printed stickers and labels into premium-looking, three-dimensional products. When applied correctly, the resin forms a smooth, raised and glossy layer over the printed surface. This dome-shaped coating enhances the colours, details, logo or artwork underneath and gives the finished label a professional appearance. MB Enterprises specifically identifies stickers and labels as common applications for doming resin, particularly when a raised and shiny finish is required for branding or decoration.

Artists and small businesses commonly use doming resin for personalised name stickers, product labels, company-logo stickers, badges, promotional decals, keychain inserts, refrigerator magnets and decorative craft labels. Flexible doming resin is especially suitable for vinyl stickers, decals and other materials that may bend slightly during use. MBEPOXY® Flexible Doming Resin is formulated to remain flexible after curing, helping reduce the risk of cracking or peeling on bendable surfaces. It also has a self-levelling, high-viscosity consistency that helps the resin stay within the sticker’s boundaries while forming a smooth dome.

For the best results, place the sticker on a completely flat and level surface before applying the resin. The printed surface should be clean, dry and free from dust, oil or moisture. Use a controlled quantity and apply it slowly from the centre, allowing the resin to spread towards the edges. Avoid overfilling because excess resin may overflow beyond the sticker boundary.

Artists should also test the resin on one sample sticker before beginning a large batch. Some inks, papers, adhesives or printing methods may react differently when coated. For flexible vinyl labels, select flexible doming resin. For labels mounted on rigid badges, metal plates or hard plastic bases, a hard-cure doming resin may be more suitable. MBEPOXY offers flexible, hard slow-cure and hard fast-cure doming resin options for different artistic and production requirements.

1 mm to 2 mm is the recommended layer thickness for doming resin.

A doming resin layer of approximately 1 mm to 2 mm is generally sufficient to create a smooth, raised and glossy dome without allowing the material to run off the edges. This thickness gives stickers, labels, badges, keychains and nameplates a noticeable three-dimensional finish while keeping the application controlled. Doming resin is formulated to produce a raised, shiny coating, and its self-levelling consistency helps it spread evenly across the design.

For the best result, begin by placing the sticker or label on a completely flat and level surface. Add a small amount of mixed resin to the centre and slowly guide it towards the edges using a fine applicator, mixing stick or toothpick. Avoid pouring the entire estimated quantity at once. Gradually adding resin gives you better control and allows you to stop when the dome reaches the required height.

The resin should sit slightly inside the outer boundary of the sticker. Its surface tension will help form the rounded dome, but adding too much can break that tension and cause the resin to flow over the sides. Very small stickers, sharp corners and irregularly shaped labels may require an even more controlled application.

Artists should also avoid using doming resin as a deep-casting material. Pouring substantially thicker than the recommended 1–2 mm layer can increase the possibility of overflowing, uneven curing, excessive heat or an irregular finish. MB Enterprises explains that coating thickness must match the resin formulation, as thicker pours require products specifically designed for casting.

Before coating an entire production batch, test one sticker or label first. Check that the surface is clean, dry and properly sealed, and ensure the worktable is level. Applying the resin slowly in the recommended 1–2 mm thickness will help artists achieve a neat, glossy and professional-looking dome with clean edges.

Yes, MBEPOXY® doming resin is self-levelling.

Doming resin is formulated to spread naturally across the surface and form a smooth, even and raised coating with minimal manual movement. After the correctly measured resin and hardener are mixed and applied to the centre of a sticker, label, badge or craft piece, the resin gradually flows outward and settles into a glossy dome. MBEPOXY Flexible Doming Resin combines self-levelling properties with high viscosity, helping it create a smooth finish while remaining controlled on the application surface.

However, self-levelling does not mean that the resin can correct every application problem automatically. Artists should still place the item on a completely flat and level work surface. Even a slight tilt may cause the resin to collect more heavily on one side or flow beyond the edge. The sticker or label should also be clean, dry and free from dust, moisture, grease or loose particles before the resin is applied.

For better control, pour a small amount of mixed doming resin into the centre of the design and allow it to spread gradually. A toothpick, fine applicator or small mixing stick can be used to guide the resin carefully towards corners and narrow sections. Avoid pushing it forcefully over the boundary. The resin’s surface tension and high-viscosity consistency help it remain in place, but overfilling may still cause it to run off the edges.

Artists should also mix the resin slowly and thoroughly to achieve a uniform consistency. Resin that is incorrectly measured, insufficiently mixed or applied in excessive quantity may not level or cure properly. Working within the recommended 1–2 mm layer and testing one sample before coating a full batch will help produce a clean, balanced and professional-looking dome.

Approximately 12 hours or 24 hours, depending on the doming resin formulation used.

Doming resin is available in fast-curing and slow-curing options, so the time required for the surface to become touch-dry is not the same for every product. MBEPOXY® Hard Fast-Cure Doming Resin has a curing time of approximately 12 hours and is suitable for artists or commercial makers who need faster production and shorter waiting periods. It produces a rigid, clear and glossy dome while helping reduce the turnaround time for stickers, labels, badges, keychains and other small products.

The Hard Slow-Cure Doming Resin and Flexible Doming Resin generally require approximately 24 hours. The slower system gives artists more time to apply the resin carefully, guide it into corners and allow trapped bubbles to release. Flexible doming resin also requires around 24 hours and is intended for labels, decals and surfaces that may bend after curing.

Even when the surface feels dry, avoid pressing, bending, packing or stacking the finished pieces immediately. Touch-dry means the upper surface is no longer wet or sticky under a very light touch; it does not always mean that the resin has reached its maximum internal hardness or final performance. Keep the coated pieces flat, covered and undisturbed during curing.

Actual drying time can also change depending on room temperature, humidity, layer thickness, measuring accuracy and mixing quality. Cold or humid weather may slow down curing, while warmer conditions may make the reaction progress faster. For consistent results, measure the resin and hardener in the recommended ratio, mix thoroughly and apply the suggested 1–2 mm layer. Artists should ideally allow the full recommended curing period before handling, packing or delivering the finished product.

Yes, fully cured doming resin provides good resistance to everyday scratches and surface wear.

Once doming resin has cured completely, it forms a clear and durable protective layer over stickers, labels, badges, keychains, nameplates and decorative craft pieces. This raised coating helps protect the artwork or printed design underneath from light scratches caused by regular handling, rubbing, packing and everyday use. MB Enterprises describes epoxy coatings as protective films that improve resistance to scratches, moisture and general wear, making doming resin useful for both decoration and surface protection.

However, scratch-resistant does not mean completely scratch-proof. Sharp objects, rough surfaces, metal tools or heavy friction can still leave marks on the cured dome. Artists should therefore handle finished pieces carefully and avoid stacking them directly against one another, especially during packing or transportation. Using soft tissue, butter paper or protective sleeves between finished products can help maintain the glossy surface.

The resin must also be allowed to cure fully before testing, cleaning, packaging or delivering the item. A surface that feels touch-dry may still be developing its final hardness. Handling the piece too early can cause fingerprints, dents or fine marks. Depending on the selected formulation, MBEPOXY doming resin may require approximately 12 or 24 hours to cure, but additional resting time may help the coating reach better hardness under cooler or more humid conditions.

Correct measuring and thorough mixing are equally important. An incorrect resin-to-hardener ratio can leave the surface soft, sticky or more vulnerable to scratching. Apply the recommended 1–2 mm layer on a clean, dry and level surface, and protect it from dust while curing.

With proper mixing, application and full curing, doming resin creates a glossy and durable finish that can withstand normal handling while keeping the artwork underneath attractive and protected for longer.

Yes, doming resin can be used on paper-based crafts and labels, provided the paper is properly sealed before application.

Doming resin can give paper labels, printed artwork, personalised name tags, logo stickers and other paper-based craft elements a raised, clear and glossy finish. Once applied, it forms a smooth dome over the design, making the colours and details appear brighter while giving the finished item a more premium, three-dimensional appearance. MB Enterprises identifies stickers and labels as common applications for doming resin, while MBEPOXY Flexible Doming Resin is designed for labels, decals and decorative artwork.

However, ordinary paper is porous and may absorb resin. This can make the paper appear darker, create uneven patches or allow the resin to soak into the printed design. To prevent this, artists should seal both the front and edges of the paper before applying doming resin. A suitable clear sealer, lamination film or transparent protective coating can create a barrier between the paper and resin. MBEPOXY’s artist guidance also recommends properly sealing absorbent craft materials before incorporating them into resin projects.

After sealing, allow the paper to dry completely and attach it securely to a flat, firm base. Apply a small quantity of mixed doming resin in the centre and let its self-levelling consistency spread gradually towards the edges. Avoid overfilling, as the resin may flow beyond the label boundary.

Artists should always test one sample first because different inks, printers, papers and sealers may react differently. Some unsealed inks can bleed or smudge when they come into contact with resin. With proper sealing, a clean surface and controlled application, doming resin can successfully transform paper-based labels and artwork into glossy, durable and professionally finished craft pieces.

100:30 and 3:1 mixing ratios are available, depending on the selected flexible or hard doming resin formulation.

The correct mixing ratio for doming resin is determined by the specific product formulation, so artists should always check the instructions printed on the resin and hardener packaging before measuring. MBEPOXY doming resin systems are available in both 100:30 and 3:1 ratios for different flexible and hard-finish requirements. These figures represent the required proportion of Part A resin to Part B hardener and should not be changed according to personal preference.

For example, a 100:30 ratio means that for every 100 grams of resin, 30 grams of hardener must be added. Therefore, if an artist measures 200 grams of resin, 60 grams of hardener will be required. MBEPOXY Flexible Doming Resin uses a 100:30 ratio and is designed to produce a clear, glossy dome while retaining flexibility after curing.

A 3:1 ratio means three parts of resin are mixed with one part of hardener. For example, 300 grams of resin would require 100 grams of hardener. MBEPOXY Hard Fast-Cure Doming Resin uses a 3:1 ratio and cures into a rigid, glossy and durable finish.

Accurate measurement is extremely important. Adding extra hardener will not necessarily make the resin cure faster, and reducing the hardener will not provide more working time. An incorrect ratio can result in a sticky, soft, cloudy or partially cured dome. For consistent results, artists should measure the components using a digital weighing scale, mix slowly and thoroughly, and scrape the sides and bottom of the container while mixing.

Do not assume that every doming resin uses the same ratio. Always follow the ratio stated for the particular flexible or hard formulation being used. Correct measurement helps achieve proper self-levelling, clarity, strength and a professional dome finish.

Doming resin is UV-resistant but prolonged exposure to direct sunlight may cause slight yellowing over time.

Doming resin is formulated to maintain clarity and resist yellowing better than ordinary epoxy systems, making it suitable for stickers, labels, badges, keychains, nameplates and decorative crafts. MBEPOXY Flexible Doming Resin specifically includes UV and yellowing resistance to help the cured dome retain its clear, glossy appearance when exposed to normal daylight.

However, UV-resistant should not be understood as completely UV-proof or permanently non-yellowing. Like most clear epoxy materials, doming resin may gradually develop a slight yellow tint when it is continuously exposed to strong sunlight, high temperatures or outdoor weather conditions. UV resistance helps slow this process, but it may not eliminate it entirely. MB Enterprises also describes doming and laminating resin systems as offering resistance to UV exposure, while its guidance notes that prolonged sunlight can affect standard epoxy over time.

For the best long-term clarity, artists should avoid displaying clear resin products in locations where they receive strong direct sunlight throughout the day. Finished pieces should preferably be stored indoors, away from windows, excessive heat and continuous outdoor exposure. MBEPOXY’s artist guidance similarly recommends selecting UV-resistant resin and limiting direct sunlight to reduce yellowing over the years.

Correct measuring, thorough mixing and complete curing are also important. An incorrect resin-to-hardener ratio or insufficient mixing can affect clarity and curing quality. Artists should follow the ratio stated for the chosen flexible or hard doming resin and allow the product to cure fully before use.

Therefore, doming resin offers good protection against normal UV exposure, but keeping finished artwork away from prolonged direct sunlight will help preserve its transparent, glossy and premium appearance for longer.

Yes, doming resin can be used for keychains and badges.

Doming resin is ideal for adding a smooth, raised and glossy finish to keychains, badges and other small decorative products. It can be applied over printed names, photographs, illustrations, logos or personalised designs to create a clear three-dimensional dome. This glossy upper layer makes the colours and details underneath appear brighter while giving the finished piece a more polished and professional look. MB Enterprises specifically lists keychains as a suitable application for doming resin, explaining that the raised coating helps the picture or logo stand out and protects the surface from normal wear and tear.

For keychains, doming resin is commonly applied over a flat insert made from plastic, metal, acrylic or another compatible rigid base. Artists can use it to finish personalised name keychains, photo keychains, business-logo keychains and decorative gift items. For badges, the resin can be applied over the printed design to create a premium-looking surface while helping protect the artwork from moisture, light scratches and regular handling.

The choice between flexible and hard doming resin depends on the base. A hard-cure formulation is generally more suitable for rigid keychains and badges because it creates a firm surface. Flexible doming resin may be selected when the underlying label or decorative piece can bend. MBEPOXY Flexible Doming Resin is formulated to provide a clear, high-gloss dome while remaining slightly flexible after curing, which helps reduce cracking or peeling on bendable surfaces.

For a neat result, place the keychain or badge on a completely level surface and apply the resin gradually from the centre. Keep the layer within the recommended 1–2 mm range and avoid overfilling, as excessive resin may flow beyond the edges. Measure the resin and hardener accurately, mix them thoroughly and protect the piece from dust while it cures. Artists should test one sample before starting a larger batch, especially when using printed paper, ink, adhesive labels or unfamiliar base materials.

Tiny craters usually form because of dust, oil, moisture or trapped air bubbles on the application surface.

Small craters in cured doming resin are often called fisheyes, pinholes or surface depressions. They usually appear when the resin cannot spread and bond evenly across the sticker, label, badge or craft base. Even a small amount of oil, grease, polish, adhesive residue or moisture can repel the resin and cause it to pull away from certain spots. MBEPOXY’s application guidance explains that surfaces containing dust or moisture can make epoxy separate, form fisheyes or cure unevenly.

Dust is another common cause because doming resin is clear and glossy, making even tiny particles visible. Clean the surface carefully and work in a dust-free area. Avoid touching the prepared label with bare fingers, as natural skin oils can transfer onto it. The item should also be completely dry before resin is applied, particularly when working with paper labels, printed stickers or freshly cleaned surfaces.

Trapped air can create tiny holes when bubbles rise and burst but the resin does not have enough time to close smoothly. Air is commonly introduced by stirring too quickly, repeatedly lifting the mixing stick or pouring aggressively. Slow and thorough mixing helps minimise air entrapment. MBEPOXY doming formulations are designed to be self-levelling and bubble-resistant, but correct preparation and application are still essential for achieving a smooth result.

Before pouring, wipe the base clean, make sure it is level and allow all cleaning products or sealers to dry fully. Mix the resin and hardener gently in the correct ratio, then apply a controlled 1–2 mm layer. Allow the mixed resin to rest briefly so some bubbles can rise before application. After pouring, inspect the surface under good lighting and release visible bubbles carefully using an appropriate low-heat method, without overheating the resin. MBEPOXY also recommends protecting resin projects from dust while they cure.

Proper cleaning, slow mixing and a dry, level workspace will greatly reduce craters and help artists achieve a clear, uniform and professional dome.

Doming resin is a thicker, controlled coating resin for raised finishes, while regular art resin is generally designed to flow across larger surfaces and create artistic effects.

The main difference between doming resin and regular art resin is their viscosity, intended application and final shape. Doming resin has a thicker consistency that helps it remain within the edges of a sticker, label, badge, keychain or nameplate. When applied in a controlled quantity, it forms a smooth, raised, three-dimensional dome rather than spreading freely across the entire work surface. MB Enterprises identifies stickers, labels, ID cards and keychains as key doming applications because the clear raised layer highlights the design and protects it from normal handling and wear.

Regular art resin is intended for creative projects such as abstract artwork, geodes, ocean art, marble effects, craft coatings and decorative panels. It generally offers greater flowability, allowing artists to spread it over a broader surface and blend pigments, inks, glitters or other decorative materials. MBEPOXY Art Resin is described as crystal-clear and self-levelling, with flow and bubble-release properties developed for artists. MBEPOXY Infinity Resin is also described as a low-viscosity coating epoxy that flows easily across surfaces.

Doming resin is normally applied in a controlled layer of approximately 1–2 mm. It may cure into either a flexible or hard finish depending on the selected formulation. Flexible doming resin is useful for labels or decals that may bend, while hard doming resin is better suited to rigid badges, keychains and nameplates. MBEPOXY offers flexible, hard slow-cure and hard fast-cure doming resin options.

Therefore, artists should use doming resin when they need a neat, raised coating on a small, defined design. Regular art resin is the better choice when the project requires broader coverage, colour blending, flowing patterns or a smooth artistic coating. Although both products may be transparent, glossy and self-levelling, they should not automatically be substituted for one another because their flow, curing behaviour and intended application are different.

Yes, doming resin can be tinted using compatible epoxy resin pigments and colourants.

Artists can add colour to doming resin to create personalised keychains, badges, labels, nameplates, stickers and other decorative craft products. Depending on the chosen colourant, the finished dome can have an opaque, translucent or lightly tinted appearance. This allows artists to match brand colours, create decorative backgrounds or add customised shades instead of keeping the resin completely transparent.

It is important to use pigments that are specifically compatible with epoxy resin. MBEPOXY pigments are epoxy-based, non-water-based and specially developed to blend into resin. They are also highly concentrated, which means only a small quantity is generally needed to achieve visible colour. Different pigment shades can also be combined to create custom colours for personalised projects.

Add the pigment gradually rather than adding a large quantity at once. Mix thoroughly until the colour is evenly dispersed and no streaks or clumps remain. Using too much pigment may affect the resin’s flow, transparency, self-levelling behaviour or curing performance. This is particularly important in doming applications because the resin must remain thick enough to stay within the edges of the sticker, badge or label.

Artists should avoid ordinary water-based paints or colourants that have not been tested with epoxy. Moisture or incompatible additives may cause cloudiness, craters, incomplete curing or separation. MB Enterprises’ epoxy pigments are designed to let users control the colour depth by adjusting the amount added, making them suitable for both lighter shades and stronger opaque effects.

Before colouring a full batch, prepare a small test sample using the same doming resin, pigment and application base. This will help confirm the final shade, opacity, curing quality and surface finish. When used in a controlled quantity, compatible resin pigments can create smooth, colourful and professional-looking domed craft pieces.

The shelf life of unused doming resin is 12 months from the manufacturing date.

Unused doming resin can generally be stored for up to 12 months from its manufacturing date, provided both the resin and hardener are kept sealed and stored correctly. Artists should check the manufacturing date and storage instructions printed on the product packaging before use, especially when working with an older kit. The 12-month shelf life applies to unmixed material; once Part A resin and Part B hardener are combined, the curing reaction begins and the mixture cannot be stored for later use.

To preserve the resin’s quality, keep both containers tightly closed in a cool, dry place away from direct sunlight, excessive heat and moisture. MBEPOXY advises storing resin and hardener in sealed containers and protecting them from direct heat and sunlight to maintain consistent performance throughout their shelf life. Avoid storing doming resin near windows, hot machinery or areas where room temperatures change frequently.

Always use separate, clean tools for the resin and hardener. Introducing dust, water, pigment residue or traces of the opposite component into the original container can contaminate the material and reduce its usable life. Wipe the bottle opening before closing it and replace the cap immediately after measuring the required quantity.

Over time, artists may notice that stored resin becomes slightly thicker or develops crystals, particularly in colder conditions. Do not automatically add solvents, water or extra hardener to correct the consistency, as this may affect curing and clarity. Follow the manufacturer’s guidance or contact the supplier before using material that appears cloudy, separated, crystallised or unusually thick.

For reliable self-levelling, clarity and curing, use doming resin within 12 months of its manufacturing date and maintain proper storage throughout that period. MBEPOXY’s doming range includes specialised flexible and hard formulations, so each resin and its matching hardener should also remain together as the original system.